- Home
- ยป
- Our Product Range
- »
- Field Calibrators
Field Calibrators
DPI610 E Portable Pressure Calibrator
Minimum Order Quantity: 1 Piece
Product Brochure
Model Name/Number | DPI610E Series |
Brand | GE DRUCK - BAKER HUGHES |
Material | ABS POLYCARBONATE |
Display Type | Digital |
Usage/Application | Industrial |
Type | PORTABLE |
Accuracy | 0.025% FULL SCALE |
Power Source | BATTERY OPERATED |
Temperature Range | -10 TO 50 c |
Adjustable Space Mm | YES |
mA Simulate External Voltage Requirement | 24v |
Loop Compliance Voltage | 24v |
Volts DC Measure | YES |
Test Connection Port | NPT OR BSP PORTS |
Features??? The complete pressure calibration tool provides pressure:o Vacuum to 35 bar/500 psi/3.5 MPa pneumaticpressures with inbuilt barometer for accurate pseudopressure measurementso Up to 1000 bar/15000 psi/100 MPa hydraulic pressures??? HART as standard on all versions??? Best in class pressure accuracy: Total 1 year uncertaintydown to 0.025% full scale (FS) over temperature range of-10??C to +50??C??? Integral calibration record with calibration due countdown??? Robust, handheld design with backlit high-contrast display??? Hazardous area (Intrinsically safe) version available??? Optional remote plug and play pressure sensor (PM700E)and Resistance Temperature Detector (RTD-INTERFACE)??? Minimise in-the-field leaks with quick-fit pressureadapters and hoses??? Full data logging and local documentingcapabilities included
Additional Information:
- Packaging Details: INDUSTRIAL CARTON PACKAGE
DPI 611 Pressure Calibrator
Minimum Order Quantity: 1 Unit
Product Brochure
Model Name/Number | DPI 611 |
Material | Polycarbonate |
Display Type | Digital |
Usage/Application | Industrial |
Type | Portable |
Weight Kg | 1.96Kg (4.3lb) including batteries |
Brand | GE DRUCK |
Operating Temperature | -10 to 50 Degree C |
Storage Temperature | -20 to 70 Degree C |
Ingress Protection | IP54 |
Humidity | 0 to 90% RH none condensing |
Altitude | Up to 2000m |
Size | 270 x 130 x 120mm (10.6 x 5.1 x 4.7 in) |
- With the symbiosis of a high performance pressure generator and fast intuitive user interface, the robust DPI 611 brings handheld pressure calibration to a new level
- 50% smaller and 33% lighter than DPI 610
- Generates 0 to 20 bar in less than 30 seconds
- Creates 95% vacuum
- Pressure measurement is twice as accurate
- Three times better electrical accuracy
- Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVOURITES storage
- Fast, three touch set-up for any application
- Calculates PASS/FAIL errors, documents results and interfaces with Calibration Software including Intecal v10 Calibration Management Software
Additional Information:
- Delivery Time: 12 weeks
- Packaging Details: INDUSTRIAL GRADE CARTON BOX
PV 411A Hand Pump
Minimum Order Quantity: 1 Unit
Product Brochure
Model Name/Number | PV411A |
Usage/Application | Pressure Calibration |
Display Type | Digital |
Material | Stainless Steel |
Pneumatic | 0 to 600 psi |
Hydraulic | 0 to 10,000 psi |
Vacuum | 0 to 28.5 in Hg |
Total weight | 2.5 lb |
Dimensions (l x w x d) | 10.2 in x 5.3 in x 3.7 in |
Pressure connections | 1/4 in NPT female |
Reservoir volume | 100 cc |
Optional large volume reservoir | 200 cc |
This remarkable product replaces four conventional handpumps and offers the following additional
Features:
- Unique vacuum priming function removes trapped air during hydraulic operation
- High pressure generation is accomplished with the volume adjuster, eliminating the physical effort associated with conventional hand pumps Pressure/Vacuum selector valve also provides exceptional fine control pressure relief in both pneumatic and hydraulic modes Tamper proof adjustable overpressure protection valve which can be set to relieve pressures from 300 to 10,000 psi Removable hydraulic reservoir which can be disconnected from the pump without draining the fluid Reservoir safety feature with spring loaded top covervents if inadvertently pressurized above 8 psi Hydraulic mode designed to operate with distilled water and/or high viscosity mineral oilHighly sensitive volume adjuster is used for hydraulic, pneumatic, vacuum and low pressure operation Built-in stroke adjuster controls the pressure/vacuum generated per stroke 240° swivel head for optimum viewing of reference indicators
- Internal moving parts are PTFE anodized for reduced friction and wear
- Ergonomic, rugged and lightweight design with comfortable hand grip
Hart Communicator
Minimum Order Quantity: 1 Number
Product Brochure
Brand | GE DRUCK |
Usage/Application | Industrial |
Model Name/Number | DPI 620G Genii |
Material | ABS Engineered Plastic |
Working Temperature | 50 Deg C |
Battery Type | Rechargeable battery |
Product Type | Digital |
Display Size | TOUCH SCREEN |
Enclosure Rating | IP 65 |
HART/Fieldbus Communicator comprises four system components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments. These system components are:
- DPI620G - Multi-function calibrator, HART/Fieldbus Communicator
- PM620 - Interchangeable pressure modules
- MC620G - Pressure module carrier
- PV62XG - Pressure generating stations
Features:
- Multi-function capabilities: electrical, frequency, temperature and pressure
- Optional HART and Foundation Fieldbus Communicators
- ATEX and IECEx approved for hazardous area use
- Modular re-rangeable and expandable concept
- Individual components can be used as stand-alone instruments
- Allows significant inventory reductions
- Simplifies training and improves operator safety
- Reduces cost of ownership
- HART and Foundation Fieldbus digital communication with complete device description libraries, internal modems and free of charge upgrades
- ATEX and IECEx approved system for use in zone 1 and 2 classified hazardous areas
- UI DASHBOARD to quickly launch applications such as CALIBRATOR, HART and Foundation Fieldbus
- TASK menu allows single touch configuration for common devices such as pressure and temperature transmitters, transducers, switches, and valve positioners. Most used and user configured tasks can be added to FAVOURITES.
- All first generation DPI620 and the new Genii system components are fully interchangeable eg pressure stations, pressure modules and all accessories
- High resolution touch display and UI (user interface) supporting gestures and swipes for a flatter menu structure and greater ease of use
Dashboard applications (model dependant):
Calibrator
- One touch selection of common tasks, e.g. P to I for a pressure transmitter
- Highest accuracy for measuring, sourcing and simulating electrical, frequency, temperature and pressure
- Simulate device inputs and measure outputs simultaneously
- Calculates errors between inputs/outputs
- Pressure system generates 100 bar/1,500 psi pneumatic and 1,000 bar/15,000 psi hydraulic pressures.
- Interchangeable pressure modules from 25 mbar/10 inH2O to 1,000 bar/15,000 psi
Documenting:
- Data log up to six channels simultaneously
- Automate calibration procedures and Document As Found and As Left results
- Store a complete plant database of procedures and results
- View standard office documents, including images, text files, spreadsheets and presentations
- Compatible with calibration management software
HART Communicator:
- Measure and source analogue variables without secondary calibration equipment
- No power during shutdown? Genii provides loop power 24 V or 28 V
- Need a 250 ohm resistor? Just select from the menu
- It’s easy to upgrade Genii with free of charge software and latest DD library
- View, change, and store device configurations
- Work off-line to create and change configurations
- Transfer device configurations to your PC
Foundation Fieldbus communicator - optional:
- Fully featured fieldbus communicator for device configuration and calibration
- Complete device description library
- It’s easy to upgrade Genii with free of charge software and latest DD library
Additional Information:
- Delivery Time: 12 WEEKS
- Packaging Details: INDUSTRIAL GRADE CARTON BOX
Fluke 726 Fluke Multifunction Calibrator
Product Brochure
Model Name/Number | Fluke 726 |
Brand | Fluke |
Material | ABS |
Display Type | Digital |
Usage/Application | Industrial |
Type | Portable |
Shock | 1 M drop test |
Battery Life | 4 to 20 hours typical, depending on functions used |
Operating Altitude | 3,000 M max |
Operating temperature | -10 to 55 Degree C |
Relative Humidity | 95% |
- Precision multifunction process calibrator designed specifically for the process industry
- Delivers precise measurement and calibration source performance with accuracies of 0.01%.
- Stores up to eight calibration results in memory for later analysis
- Offers HART mode that inserts a 250 ohm resistor in mA measure and source for compatibility with HART instrumentation
- Transmitter error % calculation, interpret calibration results without a calculator
- Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
- Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
- Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement
- New voltage input protection design for improved reliability
- Two separate channels; measure, source and view process signals simultaneously
- Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
- Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
- Source mA with simultaneous pressure measurement to conduct valve and I/P tests
- Perform fast linearity tests with auto step and auto ramp features
- Power transmitters during test using 24 V loop supply and simultaneous mA measurement
- Store frequently-used test setups for later use
- A backlit display provides better visibility in poor light
- Features frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
- Provides two separate channels to measure, source and view process signals simultaneously
Fluke 9173 Dry Block Calibrator
Product Brochure
Model Name/Number | Fluke 9173 |
Accuracy | 0.2 deg C and Stability to 0.04 deg C |
Display Type | Digital |
Power Supply | 230 V |
Brand | Fluke |
Resolution | 0.001 Degree C |
Temperature Range | 200 to 962 Degree C |
Hysteresis | 0.07 Degree C |
Size | 366 x 203 x 323 mm (14.4 x 8 x 12.7 in) |
Weight | 15 kg (33 lb) |
Computer interface | RS-232 Interface with 9930 Interface-it control software included |
Heating time | 46 min |
- Dry-wells are typically calibrated by inserting a calibrated PRT into one of the wells and making adjustments to the calibrator’s internal control sensor based on the readings from the PRT. This has limited value because the unique characteristics of the reference PRT, which essentially become “calibrated into” the calibrator, are often quite different from the thermometers tested by the calibrator. This is complicated by the presence of significant thermal gradients in the block and inadequate sensor immersion into blocks that are simply too short.
- Metrology Wells are different. Temperature gradients, loading effects, and hysteresis have been minimized to make the calibration of the display much more meaningful. We use only traceable, accredited PRTs to calibrate Metrology Wells and our proprietary electronics consistently demonstrate repeatable accuracy more than ten times better than our specs, which range from ±0.1 °C at the most commonly used temperatures to ±0.25 °C at 661 °C.
Stability:
- Heat sources from Fluke Calibration have long been known as the most stable heat sources in the world. It only gets better with Metrology Wells. Both low-temperature units (Models 9170 and 9171) are stable to ±0.005 °C over their full range. Even the 700 °C unit (Model 9173) achieves stability of ±0.03 °C. Better stability can only be found in fluid baths and primary fixed-point devices. The “off-the-shelf controllers” used by most dry-well manufacturers simply can’t provide this level of performance.
Axial uniformity:
- The EA-10/13 document suggests that dry-wells should include a zone of maximum temperature homogeneity, which extends for 40 mm (1.54 in), usually at the bottom of a well. Metrology Wells, however, combine our unique electronics with dual-zone control and more well depth than is found in dry-wells to provide homogeneous zones over 60 mm (2.36 in). Vertical gradients in these zones range from ±0.02 °C at 0 °C to ±0.4 °C at 700 °C.
- What’s more, Metrology Wells actually have these specifications published for each unit, and we stand by them.
Radial uniformity:
- Radial uniformity is the difference in temperature between one well and another well. For poorly designed heat sources, or when large-diameter probes are used, these differences can be very large. For Metrology Wells, we define our specification as the largest temperature difference between the vertically homogeneous zones of any two wells that are each 6.4 mm (0.25 in) in diameter or smaller. The cold units (9170 and 9171) provide radial uniformity of ±0.01 °C and the hot units (9172 and 9173) range from ±0.01 °C to ±0.04 °C (at 700 °C).
Additional Information:
- Delivery Time: 10 WEEKS
Digital Pressure Gauge
Product Brochure
Dial Size | 2 inch / 50 mm |
Brand | R and D Instruments |
Pressure Range | Upto 1000 Bar |
Use | Process Industries |
Display Type | Digital |
Connection Type | BSP |
Type | Portable |
Material | Plastic |
Model Name/Number | DPG |
Features:
- Micro Controller based Ÿ Large backlight alpha numeric display
- Feather Touch keypad for easy operation
- ‘Auto OFF’ function for longer battery life
- Dedicated ZERO key for Zeroing before test
- Peak Pressure measurements (+P & -P)
Additional Information:
- Delivery Time: 1 WEEK
Druck DPI 612 Flex Series
Minimum Order Quantity: 1 Number
Product Brochure
Model Name/Number | DPI 612 pFlex Low to Medium Pressure |
Brand | Baker Hughes(GE Druck) |
Material | Polycarbonate |
Display Type | Digital |
Usage/Application | Industrial |
Type | Portable |
Accuracy | 0.005% FS |
Power Source | Battery Operated |
Temperature Range | 55 C |
Warranty | 1 YEAR |
Additional Information:
- Packaging Details: CARTON PACKAGE
MA Loop Calibrator
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | GE DRUCK - BAKER HUGHES |
Material | ABS POLYCARBONATE |
Display Type | Digital |
Usage/Application | Industrial |
Model Name/Number | UPS III |
Type | PORTABLE |
Accuracy | 0.01% OF READING |
The UPS-III Loop Calibrator is an loop calibrator. Its size makes it rugged and extremely compact. Measuring 3??? x 5??? and weighing just 9.7 ounces, it fits comfortably in a shirt pocket. It is an essential tool for loop testing, instrument maintenance and valve set-up, with an easy to read display and simple to use time saving features.
Features:
- Measure or Source 0 to 24 mA
- Accuracy 0.01% of reading
- Dual mA and % readout, linear or flow
- Step, Span Check, Valve Check, Ramp
- 6 VDC measurement and continuity
- HART?? compatible
Additional Information:
- Delivery Time: 8 WEEKS
- Packaging Details: CARTON BOX
Fluke Pressure Calibrator
Model Name/Number | Fluke 718 |
Brand | Fluke |
Material | ABS |
Display Type | Digital |
Usage/Application | Industrial |
Type | Portable |
Weight Kg | 992 g (35 oz) |
Maximum Voltage | 30 volts (non-operating) |
Operating temperature | -10-55 Degree C |
Relative Humidity | 95% |
Operating Altitude | 3,000 M max |
Shock | 1 M drop test |
Vibration | Random,2 g,5 Hz - 500 Hz |
Size | 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in) |
Battery Life | 4 to 20 hours typical,depending on functions used |
Display | LCD,5 digit pressure and current simultaneous |
Our company holds vast experience in this domain and is involved in offering Fluke 718 Pressure Calibrator.
Features:
- Less maintenance
- Fully digital
- Smooth functioning
Technical Specifications: | |
Fluke 718 Series | |
Measure pressure | (Internal sensor) |
Accuracy | 0.025% full scale |
Functions | Zero, min/max, hold, damp |
Dry air, non-corrosives only | |
Fluke 718 1G | |
Range | -1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa) |
Resolution | 0.0001 psi, 0.001 mbar, 0.0001 kPa |
Over pressure | 5x Full Scale |
Functions | Zero, Min, Max, Hold, Damp |
Fluke 718 30G | |
Range | -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa) |
Resolution | 0.001 psi, 0.1 mbar, 0.01 kPa |
Over pressure | 5x Full Scale |
Functions | Zero, Min, Max, Hold, Damp |
Fluke 718 100G | |
Range | -12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa) |
Resolution | 0.01 psi, 0.1 mbar, 0.01 kPa |
Over pressure | 2x Full Scale |
Functions | Zero, Min, Max, Hold, Damp |
Fluke 718 300G | |
Range | -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa) |
Resolution | 0.01 psi, 1 mbar, 0.1 kPa |
Over pressure | 375 psi 25 bar |
Functions | Zero, Min, Max, Hold, Damp |
Fluke 718 series via 700 Series Pressure Modules | |
Range | 29 pressure modules, 0 – 1 inH20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs |
Resolution | Per pressure module specs |
Accuracy | To 0.025% of full span, per pressure module specs |
Functions | Zero, Min, Max, Hold, Damp |
Media compatibility per pressure module specs | |
Fluke 718 Series Via Built in Pump | |
Range | -12 psi or -850 mbar to full scale Supported Pressure Units; psi, inH20 (4°C), inH20 (20°C), cmH20 (4°C), cmH20 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm |
Loop power range | 24 V DC |
Accuracy | ±10% |
Drive; 20 mA into 1000 Ω for battery > 6.8 V; 700 Ω for battery 5.8 to 6.8 V | |
mA Measure | |
Range | 0 mA to 24 mA |
Resolution | 0.001 mA |
Accuracy | 0.015% + 1 count |
Fluke Temperature Calibration
Material | Plastic |
Temperature Range | 1500 deg C |
Display Type | Digital |
Power Supply | Battery Operated |
Color | Yellow |
Brand | Fluke |
Relative Humidity | 95% |
Operating Altitude | 3,000 M max |
Operating temperature | -10 to 55 Degree C |
Display | LCD, 5 digit pressure and current simultaneous |
Battery Life | 4 to 20 hours typical, depending on functions used |
Features:
- Fully automatic
- Easy to operate
- Smooth functioning
Multifunction Calibrator
Minimum Order Quantity: 1 Piece
Product Brochure
Model Name/Number | DPI 880 |
Brand | GE Druck |
Material | ABS |
Display Type | Digital |
Usage/Application | Industrial |
Type | Portable |
Power Source | BATTERIES |
Temperature Range | 55C |
and simple to use tool for testing, configuring and calibrating virtually all process parameters. It measures, sources and simulates mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressure, captures switch values and provides 24 V loop power.Simultaneous dual readings
Reads both input and output parameters simplifying calibrations and system diagnostics. Calibration values are captured on one screen and adjustments are seen in real time, for example, when making zero and span adjustments.
Programmable step and ramp outputs
Quickly step through calibrations with the %Step output or make zero and full scale adjustments using Span Check. The Ramp output is ideal for delicate analogue meters, rate of change indicators and checking valve travel and slew rates.
Adjustable nudge output
Provides small incremental output changes for accurately setting valve positioners, switches, trips, and alarms.
Automatic switch test
Captures open/closed trip values providing a fast and highly accurate "safety system" check.
HART resistor
Can be switched into the loop when required for a HART digital communicator avoiding the inconvenience of carrying a 250 Ω resistor.
24V loop power supply
Energises transmitters and control loops.
Temperature:Measures or simulates RTD or thermocouple sensors and is the ideal tool for checking probes, transmitters, process loops, indicators and controllers. Use with a temperature probe to provide a versatile thermometer. Unique thermocouple cold junction compensation Virtually eliminates errors caused by changing environmental conditions on test instruments used
outside.
Automatic detection of 2, 3 and 4 wire RTDs
Quickly detect damaged sensors and faulty wiring that
could otherwise be missed or cause system inaccuracy.
Thermometer with wide probe compatibility
Compatibility with 8 RTDs and 12 thermocouples allows probe selection for any thermometer application, e.g. general purpose, high temperature, hygienic and aggressive media.
Frequency:Measures or sources Hz, kHz, CPM and CPH providing a highly accurate calibration standard and versatile test tool for process technicians and electronic engineers. Dedicated features facilitate test and maintenance of electronic circuits, frequency/flow meters, batch counters, tachometers, and motion pickups.
Automatic trigger
Detects the best value regardless of waveform or amplitude.
Pressure:Intelligent Digital Output Sensor (IDOS) Pressure Modules
are available from 10 in H2O to 10,000 psi
Features:
- Sources and reads mA, mV, V, ohms, frequency and pulses
- Simulates and reads 8 RTDs and 12 thermocouples
- 32 pressure modules from 10 in H20 to 10,000 psi (25 mbar to 700 bar)
- Simultaneous dual reading capability
- Automatic switch test and pressure leak test
- 1000 point data storage with real time clock
- 24 V loop power supply
- HART® loop resistor
- Large backlit display
- Robust and weatherproof
- Compact, simple to use, easy to carry
- Convenient one-handed operation
- Plug/play connector for IDOS Universal Pressure
Modules
Applications:
- Test and maintenance
- Transmitter calibration
- Loop set-up and diagnostics
- Switch, trip and alarm verification
Additional Information:
- Delivery Time: 10 WEEKS
- Packaging Details: CARTON BOX
PV210 Low Pressure Calibration Pump
Minimum Order Quantity: 1 Number
Product Brochure
Max Flow Rate | Low flow suitable for Low Pressure Calibration |
Material | Anodized Aluminium |
Model Name/Number | PV210 |
Brand | DRUCK |
The PV210 is a lightweight, yet rugged and durable, lowpressure and vacuum hand pump offering exceptionalfine control. Thermally insulated to eliminate hand heldtemperature effects and supplied with a built-in pressurerelief valve to protect the test instrument, this pump wastruly designed with the requirements of low pressurecalibrations in mind.• Dual source of pneumatic pressure and vacuum• Finger-tight quick fit connectors• Extremely low pressures generated by using the fineadjust vernier alone• Built-in pressure relief valve for setting maximumoutput pressure• Fine control needle valve for pressure release
Digital Pressure Indicator
Minimum Order Quantity: 1 Piece
Product Brochure
Display Type | Digital |
Brand | GE Druck |
Material | Stainless Steel |
Battery Life | 100 HRS |
Model Name/Number | DPI 104 |
Mounting Type | Bottom Entry |
Pressure Type | Gauge Pressure |
Display Digits | 5 |
Connection Size | 1/4 inch |
Power Source | BATTERY |
Pressure Range | 0 to 300 bar(0 to 4000 psi) |
Connection Type | BSP |
Voltage | Battery Operated |
Dial Type | Dry |
Use | Calibration |
Additional Information:
- Packaging Details: CARTON BOX
Druck DPI705E Pressure Indicator
Minimum Order Quantity: 1 NO
Product Brochure
Size | L 200 mm, W 95 mm, D 43 mm 563 g maximum |
Style | COMPACT AND PORTABLE |
Fuel Type | AIR |
Voltage | BATTERY OPERATED |
Display Type | Digital |
Model Name/Number | DPI705E |
Brand | GE DRUCK(BAKER HUGHES) |
Material | Impact resistant, sealed to IP54 |
Applications | Pressure Measurement, Testing and Calibration |
Accuracy | 0.1% FS Standard and 0.05%FS High Accuracy Option |
Alarm | User adjustable; high and low pressure alarms with visual (Bell Icon, Pressure Reading and Backlight |
Ambient Temperature | -10 to 50 C |
Additional Information:
- Delivery Time: 4 weeks