Endress Hauser Vortex Flow Meter
Prowirl F is the multivariable flowmeter with inline wet steam measurement. Its calibration option PremiumCal guarantees excellent measuring accuracy and highest plant availability at low flow rates of gas, steam and liquids. With genuine loop-powered technology, Prowirl F 200 enables cost-effective and seamless integration into existing infrastructures. It offers highest operational safety in hazardous areas. Heartbeat Technology ensures process safety at all times.
Preferred measuring principle for wet/saturated/superheated steam, gases & liquids (also cryogenic)
Suitable for a wide range of applications; optimized for steam applications.
Endress Hauser Ultrasonic Flow Meter
Using ultrasonic waves, the flow volume of a wide variety of gases and liquids can be measured reliably – independent of electrical conductivity, pressure, temperature or viscosity.
In applications that require traceable and guaranteed accuracy, inline ultrasonic sensors are preferred for use. Clamp-on ultrasonic sensors, on the other hand, are installed on the outer wall of the pipe and thus also enable temporary measurements or a retrofitting.
For retrofitted installation without interrupting the process
Aggressive fluids can be measured without any problems, even under high pressure
Suitable for pipes made of plastic, steel, cast iron composite materials (lined/unlined)
For pipe diameters up to DN 4000 (156")
Guaranteed accuracy thanks to traceable factory calibration
Robust industrial design in accordance with ASME and EN
Short inlet runs
For pipelines up to DN 300 (12")
ABB Orifice Flow Meter
OriMaster is a compact orifice flowmeter that combines a wafer-mounted orifice carrier, integral manifold and transmitter into a single, fully-codable, orifice-based flowmeter.
Endress Hauser Coriolis Mass Flow Meter
The Coriolis measuring principle is used in a wide range of different branches of industry, such as the life sciences, chemicals, petrochemicals, oil and gas, food, and – no less importantly – in custody transfer applications. Coriolis flowmeters can measure virtually all fluids: cleaning agents, solvents, fuels, crude oil, vegetable oils, animal fats, latex, silicon oils, alcohol, fruit solutions, toothpaste, vinegar, ketchup, mayonnaise, gases or liquefied gases.
Emerson Vortex Flow Meter
Vortex flow meters offer many advantages for flow measurement including easy installation without impulse lines, no moving parts to maintain or repair, less leak potential and a wide flow turndown range. Vortex meters also offer very low power consumption, allowing for use in remote areas.
Additionally, Vortex meters are unique in that they can accommodate liquids, gasses, steam and corrosive applications. Vortex flow meters are also able to withstand high process pressures and temperatures.VIEW PRODUCTS
Emerson Coriolis Mass Flow Meter
R-Series General Purpose Coriolis Flow and Density Meter
Low-footprint, drainable R-Series Coriolis flow meters provide accurate flow and density measurements, and
Ultrasonic Flow Meter
Minimum Order Quantity: 1 Number
|Operating Temperature||80 C|
|Flow Media Type||Water|
Flow meter is obstructionless and maintenance free.
Yokogawa Coriolis Mass Flow Meter
Minimum Order Quantity: 1 Unit
|Application Media||Any Liquid|
|Power Supply||24 V|
Yokogawa Coriolis Mass Flow Meter employs a flame-proof type converter case suitable for use in the hazardous area together with its intrinsically safety type detector.
Yokogawa Coriolis Mass Flow Meter signal processing, housing protection and its detector's special decoupling system against external loads and vibrations, realize high performance in real applications.
Versaflow Clamp On Ultrasonic Flow Meter
Versaflow Vortex Flow Meter
The VersaFlow Vortex Shedding flow meter is a two-wire design that is available in configurations for pipe line sizes from DN15 to DN100 (1/2” to 4”) in a wafer design and DN15 to DN300 (1/2” to 12”) in a flanged design.
ABB Coriolis Mass Flow Meter
Metal Tube Rotameters
Suitable to measure flow rate of opaque / translucent liquid, gases, steam and vapour under critical operating conditions.
- Available in SS-316 / SS-304 / P.P. construction and flanged from 25 NB to 150 NB pipe size and PTFE Lined
- Heating Jacket on request
- High & low flow switches on request
- Accuracy ± 2% FSD
- Available in 300, 350 and 500 mm height
- Available in SBLS from 15 NB to 150 NB and flow 500 LPH to 50,000 LPH
- Flanged, Screweded, TC Joint, SMS Union
- Flow Transmitter with Digital Display, Totalized with Batch
- Controller on request
Glass Tube Rotameter
Mainly used for measuring rated flow of liquid and gases.
- Available in C.S., SS-304, SS-316, Poly Propelene, P.T.F.E. lined
- Flanged, Screwed, Hose Nipple & TC Joint connections
- Available from 15 NB to 100 NB pipe size and ranges between 30 to 30,000 LPH of water at ambient temperature and Linear
- Scale having Accuracy of ± 2% FSD
- High & low flow switches